# Anki development

## Packaged betas

For non-developers who want to try beta versions, the easiest way is to use a
packaged version - please see:

https://betas.ankiweb.net/

## Pre-built Python wheels

Pre-built Python packages are available on PyPI. They are useful if you wish to:

-   Run Anki from a local Python installation without building it yourself
-   Get code completion when developing add-ons
-   Make command line scripts that modify .anki2 files via Anki's Python libraries

You will need the 64 bit version of Python 3.9 or 3.10 installed. 3.9 is recommended,
as Anki has only received minimal testing on 3.10 so far, and some dependencies have not
been fully updated yet. On Windows, only 3.9 will work. You can install Python from
python.org or from your distro.

**Mac/Linux**:

```
$ python3.9 -m venv ~/pyenv
$ ~/pyenv/bin/pip install --upgrade pip
$ ~/pyenv/bin/pip install aqt[qt6]
```

Then to run Anki:

```
$ ~/pyenv/bin/anki
```

On Linux, the pre-built wheel for x86_64 requires glibc 2.28 or later.

**Windows**:

```
c:\> python -m venv \pyenv
c:\> \pyenv\scripts\pip install --upgrade pip
c:\> \pyenv\scripts\pip install aqt[qt6]
```

Then to run Anki:

```
c:\> \pyenv\scripts\anki
```

**ARM Linux**

Since PyQt wheels are not available on PyPI, you'll need to use your system
version instead. To use the pre-built wheels:

-   Ensure you're on a distro that has Python 3.9/3.10, glibc 2.31, and
    PyQt5.14+.
-   Install the PyQt packages, eg `apt install python3-pyqt5.qtwebengine`.
-   Use the following commands:

```
$ python3.9 -m venv ~/pyenv --system-site-packages
$ ~/pyenv/bin/pip install --upgrade pip
$ ~/pyenv/bin/pip install aqt
```

## Building from source

Platform-specific instructions:

-   [Windows](./windows.md)
-   [Mac](./mac.md)
-   [Linux](./linux.md)
-   [Other Platforms](./new-platform.md)

Before contributing code, please see [Contributing](./contributing.md).

If you'd like to contribute translations, please see <https://translating.ankiweb.net/>.

## Building redistributable wheels

Run the following command to create Python packages that can be redistributed
and installed:

On Mac/Linux:

```
./scripts/build
```

On Windows:

```
.\scripts\build.bat
```

The generated wheel paths will be printed as the build completes.

You can then install them by copying the paths into a pip install command.
Follow the steps in the "Pre-built Python wheels" section above, but replace the
"pip install aqt" line with something like:

```
pip install --upgrade bazel-dist/*.whl
```

On Windows you'll need to list out the filenames manually.

You'll also need to install PyQt:

```
$ pip3 install pyqt6 pyqt6-webengine
```

or

```
$ pip3 install pyqt5 pyqtwebengine
```

### Wheels on Linux

Linux users can build using instructions above, or they can optionally [build
via Docker](../scripts/docker/README.md).

On Linux, the generated Anki wheel will have a filename like:

    anki-2.1.49-cp39-abi3-manylinux_2_31_aarch64.whl

The 2_31 part means that the wheel requires glibc 2.31 or later. If you have
built the wheel on a machine with an older glibc version, you will get an error
if you try to install the wheel:

    ERROR: No matching distribution found for anki

To avoid the error, you can rename the .whl file to match your glibc version.

If you still get the error, another possibility is that you are trying to
install with an old version of Python - 3.9 or later is required.

On ARM Linux, please see the instructions in the pre-built wheels section about
a system PyQt, and the notes at the bottom of [Linux](./linux.md).

## Running tests

You can run all tests at once. From the top level project folder:

```
bazel test ...
```

If you're in a subfolder, `...` will run the tests in that folder.
To run all tests, use `//...` instead.

Pylint will currently fail if you're using Python 3.9.

To run a single Rust unit test with output, eg 'unbury':

```
bazel run rslib:unit_tests -- --nocapture unbury
```

To run a single Python library test, eg test_bury:

```
PYTEST=test_bury bazel run //pylib:pytest
```

On Mac/Linux, after installing 'fswatch', you can run mypy on
each file save automatically with:

```
./scripts/mypy-watch
```

## Fixing formatting

For formatting issues with .ts, .svelte and .md files, change to the folder
that's causing the problem, and then run

```
bazel run //ts:format
```

For other packages, change to the folder and run

```
bazel run format
```

For the latter cases, you can also invoke the formatter from another folder by using
the full path:

```
bazel run //rslib:format
bazel run //rslib:sql_format
bazel run //proto:format
bazel run //pylib:format
bazel run //qt:format
bazel run //pylib/rsbridge:format
```

## Development speedups

If you're frequently switching between Anki versions, you can create
a user.bazelrc file in the top level folder with the following, which will
cache build products and downloads:

```
build --disk_cache=~/bazel/ankidisk --repository_cache=~/bazel/ankirepo
```

## Python editing

PyCharm or IntelliJ IDEA seems to give the best Python editing experience. Make sure
you build/run Anki first, as code completion depends on the build process to generate
a bunch of files.

After telling PyCharm to create a new virtual environment for your project, locate
pip in the virtual environment, and run `pip install -r pip/requirements.txt` to install
all of Anki's dependencies into the environment, so that code completion works for them.
Then run `pip install pyqt5 pyqtwebengine` to install PyQt.

Visual Studio Code + the Python extension does support code completion, but
currently seems to frequently freeze for multiple seconds while pinning the CPU
at 100%. Switching from the default Jedi language server to Pylance improves the
CPU usage, but Pylance doesn't do a great job understanding the type annotations.

## Rust editing

Currently Visual Studio Code + Rust Analyzer seems to be the best option out
there. Once Rust Analyzer is installed, you'll want to enable the options to
expand proc macros and build scripts, and run cargo check on startup. Adding
`+nightly` as an extra arg to rustfmt will get you nicer automatic formatting
of `use` statements.

The Bazel build products will make RA start up slowly out of the box. For a much
nicer experience, add each of the `bazel-*` folders to Rust Analyzer's excludeDirs
settings, and node*modules. Wildcards don't work unfortunately. Then adjust
VS Code's "watcher exclude", and add `\*\*/bazel-*`.

After running 'code' from the project root, it may take a minute or two to be
ready.

## TypeScript editing

Visual Studio Code seems to give the best experience. Use 'code ts' from the project
root to start it up.

IntelliJ IDEA works reasonably well, but doesn't seem to do as good a job at offering
useful completions for things like i18n.TR.

## Audio

Audio playing requires `mpv` or `mplayer` to be in your system path.

Recording also requires `lame` to be in your system path.

## Build errors and cleaning

If you get errors with @npm and node_modules in the message, try deleting the
node_modules folder.

On Windows, you may run into 'could not write file' messages when TypeScript
files are renamed, as the old build products are not being cleaned up correctly.
You can either remove the problem folder (eg
bazel-out/x64_windows-fastbuild/bin/ts/projectname), or do a full clean.

To do a full clean, use a `bazel clean --expunge`, and then remove the node_modules
folder.

## Tracing build problems

You can run bazel with '-s' to print the commands that are being executed.

## Environmental Variables

If ANKIDEV is set before starting Anki, some extra log messages will be printed on stdout,
and automatic backups will be disabled - so please don't use this except on a test profile.

If TRACESQL is set, all sql statements will be printed as they are executed.

If LOGTERM is set before starting Anki, warnings and error messages that are normally placed
in the collection2.log file will also be printed on stdout.

If ANKI_PROFILE_CODE is set, Python profiling data will be written on exit.

## Mixing development and study

You may wish to create a separate profile with File>Switch Profile for use
during development. You can pass the arguments "-p [profile name]" when starting
Anki to load a specific profile.

If you're using PyCharm:

-   right click on the "run" file in the root of the PyCharm Anki folder
-   click "Edit 'run'..." - in Script options and enter:
    "-p [dev profile name]" without the quotes
-   click "Ok"
