Anki 1.0 had a similar feature but we do things a bit differently now. The
relative spacing applies only to reviews, and spaces cards according to their
interval, instead of spacing all cards the same. Any delay < 1 full day is
treated as no delay, so with the default 10% setting, reviews with an interval
< 10 days are not spaced at all. This should hopefully cut down on support
queries for people wondering why many of their cards were delayed, allows the
two settings to be documented separately, and does away with the somewhat
confusing usage of non-integer new sibling values to disable review spacing.
- this fixes a state where cards failed on that future day could end up
with an earlier due date that the rest of the failed mature cards, leading
to the newly failed cards being repeated prematurely
- this leads to non-deterministic scheduling of the mature bonus fails, so
they are effectively randomized which is probably what most users want
if a client with a clock greater than server time synced a deck, the modified
time ended up higher than lastSync when the deck was modified on the server.
instead we force the modified time to be <= the server time, which is known
correct.
this addresses a bug where mplayer was sometimes not being restarted when
opening a new deck, and should remove the need for atexit or hacks in the GUI
code to make sure mplayer is closed
This works fine if the user is showing all cards, but if they have limited
reviews to certain categories, it can result in the counts going negative
because we decremented for cards which weren't actually due. Determining if a
card was actually due or not is an expensive operation, so instead we leave
the counts alone and make sure reviews will finish early if the new/rev counts
are non-zero but the queue is empty.
because field formatting is always on now, users with custom font
sizes/families set only on the card will still have to alter their templates
and either configure the fields or replace the references with triple
curly braces
- move latex preamble into a deck var and include amsmath by default
- include the pre/postamble in the hash, so changes to the preamble result in
newly generated images
- latex now slots in to the formatQA hook to render images in the q/a
- moved call() to utils
- cache/uncache latex have been obsoleted. User can delete manually, and
images will be regenerated with a DB check
- media is no longer hashed, and instead stored in the db using its original
name
- when adding media, its checksum is calculated and used to look for
duplicates
- duplicate filenames will result in a number tacked on the file
- the size column is used to count card references to media. If media is
referenced in a fact but not the question or answer, the count will be zero.
- there is no guarantee media will be listed in the media db if it is unused
on the question & answer
- if rebuildMediaDir(delete=True), then entries with zero references are
deleted, along with any unused files in the media dir.
- rebuildMediaDir() will update the internal checksums, and set the checksum
to "" if a file can't be found
- rebuildMediaDir() is a lot less destructive now, and will leave alone
directories it finds in the media folder (but not look in them either)
- rebuildMediaDir() returns more information about the state of media now
- the online and mobile clients will need to to make sure that when
downloading media, entries with no checksum are non-fatal and should not
abort the download process.
- the ref count is updated every time the q/a is updated - so the db should be
up to date after every add/edit/import
- since we look for media on the q/a now, card templates like '<img
src="{{{field}}}">' will work now
- export original files as gone as it is not needed anymore
- move from per-model media URL to deckVar. downloadMissingMedia() uses this
now. Deck subscriptions will have to be updated to share media another way.
- pass deck in formatQA, as latex support is going to change
this bypasses rebuilding the queue and other startup initialization and thus
loads the deck considerably faster. This is useful when you want to perform
operations on the deck like syncing, but don't need the ability to review
cards
- obsolete spaceUntil - it serves no useful purpose
- the old per-model spacing variables are obsolete, as the new approach
requires uniform spacing across all models for new cards
- introduce a new per-deck variable: newSpacing
- don't fill new queue if we've done today's cards
- still need to check cramming / review early
newSpacing is a time in seconds to delay introduction of sibling new cards.
It can be applied as many times as necessary as there is no harm in new cards
being delayed repeatedly. Because the default queue length is 200 and it can
take quite some time for the spaced cards to be placed in the queue again, we
use a separate array to track spaced new cards provided the configured delay
is less than 20 minutes. At times under 20 minutes this number is not a
guaranteed minimum spacing - if the new card queue is empty the spaced cards
will be flushed before checking the new queue again, as otherwise we end up
trying to fill on every repetition. The due counts no longer decrease by more
than one if the spacing is less than the due cutoff, since that confused some
users.
Review cards are now placed at the end of the current review queue, and will
never be rescheduled to a different day. The old approach had a number of
problems:
- the more card models you had, the more likely a card would be spaced
multiple times, resulting in you forgetting the card before you get a chance
to review it
- spacing was applied even if the due card was already late
- repeatedly failing one card over a period of days or weeks would also stave
the other cards of attention
- use bar graphs instead of line graphs for 3 months or less
- easier to read shades of blue for reps graph
- simplify day cutoff calculation
- fix off by one bug in work done data
- add missing entries when calculating cumulative due
- the local deck name must now match the online deck
- syncName is a hash of the current deck's path or None
- the hash is checked on deck load, and if it is different (because the deck
was copied or moved), syncing is disabled. This should prevent people from
accidentally clobbering their online decks
When you call operations like deleteCards(), suspendCards() and so on, it is
now necessary to call deck.reset() afterwards. This allows the calling code to
delay a reset if necessary. If the calling code calls a function that says the
caller must reset, the caller should be sure to call .reset() and fetch the
current card again. Failure to do the latter will result in answerCard()
attempting to remove the card from the queue, when the queue has been cleared.
- make sure cardLimit() matches on sql statements that are broken over lines
- fix logic in getCardId()
- don't increment failed count if delay1>0 and card was mature
The old delay1 behaviour isn't easy to achieve with the queue code, as we only
refresh the queue when it's emptied, and if the user has delay1 set to say 9
hours, failed mature cards sitting in the queue could prevent subsequent young
failures from being displayed. Instead we convert delay1 to a count in days in
which to offset failed mature cards. 0 means the same time as delay0, 1 means
show the card a day later, and so on. This means users will lose the ability
to delay mature cards for x number of minutes more than young cards, but a
scan of AnkiOnline decks indicates that's not often done.
We also need to use a separate cutoff for failed cards, since we need to be
able to display them as they expire if the user has disabled per-day
scheduling.
And instead of marking cards as due in the future, we set their due time to
the current time, and move the delay0 calculation to getCardId(). This means
that if the user changes their failed card settings from say 1 hour to 10
minutes, the changes apply to the currently failed cards and not just cards
failed in the future.
In various parts of the code we need to get all cards of a given category
(new, failed, etc) regardless of whether they're suspended, buried, etc. So we
store the true type in the obsolete relativeDelay column and add in index for
it, because it's cheaper than putting indices on reps & successive.
- because the cutoff adds a few hours past midnight, it's possible for a card
that's scheduled for 1.0 days ahead to fall within the current cutoff, so we
need to make sure that doesn't happen
- set spaceUntil=0 when answering card again
- fix randomizeNewCards() query. the whole codebase needs auditing for type
references which need updating
