* Allow im-/exporting with or without deck configs
Closes#2777.
* Enable webengine remote debugging in launch.json
* Reset deck limits and counts based on scheduling
Also:
- Fix `deck.common` not being reset.
- Apply all logic only depending on the source collection in the
gathering stage.
- Skip checking for scheduling and only act based on whether the call
wants scheduling. Preservation of filtered decks also depends on all
original decks being included.
- Fix check_ids() not covering revlog.
* Fix importing legacy filtered decks w/o scheduling
* Disable 'include deck options' by default, and fix tab order (dae)
* deck options > deck presets (dae)
Previously it was Backend's responsibility to store the last progress,
and when calling routines in Collection, one had to construct and pass
in a Fn, which wasn't the most ergonomic. This PR adds the last progress
state to the collection, so that the routines no longer need a separate
progress arg, and makes some other tweaks to improve ergonomics.
ThrottlingProgressHandler has been tweaked so that it now stores the
current state, so that callers don't need to store it separately. When
a long-running routine starts, it calls col.new_progress_handler(),
which automatically initializes the data to defaults, and updates the
shared UI state, so we no longer need to manually update the state at
the start of an operation.
The backend shares the Arc<Mutex<>> with the collection, so it can get
at the current state, and so we can update the state when importing a
backup.
Other tweaks:
- The current Incrementor was awkward to use in the media check, which
uses a single incrementing value across multiple method calls, so I've
added a simpler alternative for such cases. The old incrementor method
has been kept, but implemented directly on ThrottlingProgressHandler.
- The full sync code was passing the progress handler in a complicated
way that may once have been required, but no longer is.
- On the Qt side, timers are now stopped before deletion, or they keep
running for a few seconds.
- I left the ChangeTracker using a closure, as it's used for both importing
and syncing.
Will be handy to use it in our other scripts in the future too - thanks
Rumo!
Results of benchmarking ./run before and after these crate splits:
- Touching a proto file leads to a slight increase: about +90ms
- Touching an rslib file leads to a bigger decrease, as there's less to
recompile: about -700ms
And ./ninja test is even better: about +200ms and -3800ms.
* Move open_test_collection into Collection test impl
* Fix invalid ids when checking database
* Report fixed invalid ids
* Improve message when trying to export invalid ids
Also move ImportError due to namespace conflicts with snafu macro.
* Take a human name in DeckAdder::new
* Mention timestamps in the db check message (dae)
Will help to correlate the fix with the message shown when importing/
exporting.
* Add CardAdder test helper
* Add option to have new cards ignore the review limit
Also entails a lot of refactoring because the old code was deeply
coupled to the previous behaviour.
* Add global option to ignore review limit
* Refactor decrementation
* Unify testing
* Add crate snafu
* Replace all inline structs in AnkiError
* Derive Snafu on AnkiError
* Use snafu for card type errors
* Use snafu whatever error for InvalidInput
* Use snafu for NotFoundError and improve message
* Use snafu for FileIoError to attach context
Remove IoError.
Add some context-attaching helpers to replace code returning bare
io::Errors.
* Add more context-attaching io helpers
* Add message, context and backtrace to new snafus
* Utilize error context and backtrace on frontend
* Rename LocalizedError -> BackendError.
* Remove DocumentedError.
* Have all backend exceptions inherit BackendError.
* Rename localized(_description) -> message
* Remove accidentally committed experimental trait
* invalid_input_context -> ok_or_invalid
* ensure_valid_input! -> require!
* Always return `Err` from `invalid_input!`
Instead of a Result to unwrap, the macro accepts a source error now.
* new_tempfile_in_parent -> new_tempfile_in_parent_of
* ok_or_not_found -> or_not_found
* ok_or_invalid -> or_invalid
* Add crate convert_case
* Use unqualified lowercase type name
* Remove uses of snafu::ensure
* Allow public construction of InvalidInputErrors (dae)
Needed to port the AnkiDroid changes.
* Make into_protobuf() public (dae)
Also required for AnkiDroid. Not sure why it worked previously - possible
bug in older Rust version?
* Keep filtered decks when importing apkg
If all original decks exist and scheduling is included.
* Create missing decks from csv
* Export original decks if with_scheduling
* Also remap original deck ids on import
* Update imported filtered decks
* Fix meta column being mapped to tags
* Fix ids in csv deck and notetype columns
Note: This implies names which parse to an i64 will be seen as ids,
likely resulting in the intended deck/notetype not being found.
* Check for scheduling with revlog and deck configs
Might help with cases in which scheduling was included, but all cards
are new. In such a case, filtered deck should not be converted.
* Fix duplicate with same GUID being created
* Remove redundant `distinct`s from sql query
* Match notes by _either_ guid _or_ first field
* Refactor to emphasise GUID/first field distinction
* Export default deck and config if with scheduling
* Fix default deck being exported if it's a parent
* Add deck-specific limits to DeckNormal
* Add deck-specific limits to schema11
* Add DeckLimitsDialog
* deck_limits_qt6.py needs to be a symlink
* Clear duplicate deck setting keys on downgrade
* Export deck limits when exporting with scheduling
* Revert "deck_limits_qt6.py needs to be a symlink"
This reverts commit 4ee7be1e10.
* Revert "Add DeckLimitsDialog"
This reverts commit eb0e2a62d3.
* Add day limits to DeckNormal
* Add deck and day limits mock to deck options
* Revert "Add deck and day limits mock to deck options"
This reverts commit 0775814989.
* Add Tabs component for daily limits
* Add borders to tabs component
* Revert "Add borders to tabs component"
This reverts commit aaaf553893.
* Implement tabbed limits properly
* Add comment to translations
* Update rslib/src/decks/limits.rs
Co-authored-by: Damien Elmes <dae@users.noreply.github.com>
* Fix camel case in clear_other_duplicates()
* day_limit → current_limit
* Also import day limits
* Remember last used day limits
* Add day limits to schema 11
* Tweak comment (dae)
* Exclude day limit in export (dae)
* Tweak tab wording (dae)
* Update preset limits on preset change
* Explain tabs in tooltip (dae)
* Omit deck and today limits if v2 is enabled
* Preserve deck limit when switching to today limit
The old `media_files_did_export` hook has been kept around for use with
the legacy apkg exporter (an add-on uses it), and a new
`legacy_export_progress` hook has been added so we can get progress
from the new colpkg exporter until we move over fully to the new code.
* Add apkg export on backend
* Filter out missing media-paths at write time
* Make TagMatcher::new() infallible
* Gather export data instead of copying directly
* Revert changes to rslib/src/tags/
* Reuse filename_is_safe/check_filename_safe()
* Accept func to produce MediaIter in export_apkg()
* Only store file folder once in MediaIter
* Use temporary tables for gathering
export_apkg() now accepts a search instead of a deck id. Decks are
gathered according to the matched notes' cards.
* Use schedule_as_new() to reset cards
* ExportData → ExchangeData
* Ignore ascii case when filtering system tags
* search_notes_cards_into_table →
search_cards_of_notes_into_table
* Start on apkg importing on backend
* Fix due dates in days for apkg export
* Refactor import-export/package
- Move media and meta code into appropriate modules.
- Normalize/check for normalization when deserializing media entries.
* Add SafeMediaEntry for deserialized MediaEntries
* Prepare media based on checksums
- Ensure all existing media files are hashed.
- Hash incoming files during preparation to detect conflicts.
- Uniquify names of conflicting files with hash (not notetype id).
- Mark media files as used while importing notes.
- Finally copy used media.
* Handle encoding in `replace_media_refs()`
* Add trait to keep down cow boilerplate
* Add notetypes immediately instaed of preparing
* Move target_col into Context
* Add notes immediately instaed of preparing
* Note id, not guid of conflicting notes
* Add import_decks()
* decks_configs → deck_configs
* Add import_deck_configs()
* Add import_cards(), import_revlog()
* Use dyn instead of generic for media_fn
Otherwise, would have to pass None with type annotation in the default
case.
* Fix signature of import_apkg()
* Fix search_cards_of_notes_into_table()
* Test new functions in text.rs
* Add roundtrip test for apkg (stub)
* Keep source id of imported cards (or skip)
* Keep source ids of imported revlog (or skip)
* Try to keep source ids of imported notes
* Make adding notetype with id undoable
* Wrap apkg import in transaction
* Keep source ids of imported deck configs (or skip)
* Handle card due dates and original due/did
* Fix importing cards/revlog
Card ids are manually uniquified.
* Factor out card importing
* Refactor card and revlog importing
* Factor out card importing
Also handle missing parents .
* Factor out note importing
* Factor out media importing
* Maybe upgrade scheduler of apkg
* Fix parent deck gathering
* Unconditionally import static media
* Fix deck importing edge cases
Test those edge cases, and add some global test helpers.
* Test note importing
* Let import_apkg() take a progress func
* Expand roundtrip apkg test
* Use fat pointer to avoid propogating generics
* Fix progress_fn type
* Expose apkg export/import on backend
* Return note log when importing apkg
* Fix archived collection name on apkg import
* Add CollectionOpWithBackendProgress
* Fix wrong Interrupted Exception being checked
* Add ClosedCollectionOp
* Add note ids to log and strip HTML
* Update progress when checking incoming media too
* Conditionally enable new importing in GUI
* Fix all_checksums() for media import
Entries of deleted files are nulled, not removed.
* Make apkg exporting on backend abortable
* Return number of notes imported from apkg
* Fix exception printing for QueryOp as well
* Add QueryOpWithBackendProgress
Also support backend exporting progress.
* Expose new apkg and colpkg exporting
* Open transaction in insert_data()
Was slowing down exporting by several orders of magnitude.
* Handle zstd-compressed apkg
* Add legacy arg to ExportAnkiPackage
Currently not exposed on the frontend
* Remove unused import in proto file
* Add symlink for typechecking of import_export_pb2
* Avoid kwargs in pb message creation, so typechecking is not lost
Protobuf's behaviour is rather subtle and I had to dig through the docs
to figure it out: set a field on a submessage to automatically assign
the submessage to the parent, or call SetInParent() to persist a default
version of the field you specified.
* Avoid re-exporting protobuf msgs we only use internally
* Stop after one test failure
mypy often fails much faster than pylint
* Avoid an extra allocation when extracting media checksums
* Update progress after prepare_media() finishes
Otherwise the bulk of the import ends up being shown as "Checked: 0"
in the progress window.
* Show progress of note imports
Note import is the slowest part, so showing progress here makes the UI
feel more responsive.
* Reset filtered decks at import time
Before this change, filtered decks exported with scheduling remained
filtered on import, and maybe_remove_from_filtered_deck() moved cards
into them as their home deck, leading to errors during review.
We may still want to provide a way to preserve filtered decks on import,
but to do that we'll need to ensure we don't rewrite the home decks of
cards, and we'll need to ensure the home decks are included as part of
the import (or give an error if they're not).
https://github.com/ankitects/anki/pull/1743/files#r839346423
* Fix a corner-case where due dates were shifted by a day
This issue existed in the old Python code as well. We need to include
the user's UTC offset in the exported file, or days_elapsed falls back
on the v1 cutoff calculation, which may be a day earlier or later than
the v2 calculation.
* Log conflicting note in remapped nt case
* take_fields() → into_fields()
* Alias `[u8; 20]` with `Sha1Hash`
* Truncate logged fields
* Rework apkg note import tests
- Use macros for more helpful errors.
- Split monolith into unit tests.
- Fix some unknown error with the previous test along the way.
(Was failing after 969484de4388d225c9f17d94534b3ba0094c3568.)
* Fix sorting of imported decks
Also adjust the test, so it fails without the patch. It was only passing
before, because the parent deck happened to come before the
inconsistently capitalised child alphabetically. But we want all parent
decks to be imported before their child decks, so their children can
adopt their capitalisation.
* target[_id]s → existing_card[_id]s
* export_collection_extracting_media() → ...
export_into_collection_file()
* target_already_exists→card_ordinal_already_exists
* Add search_cards_of_notes_into_table.sql
* Imrove type of apkg export selector/limit
* Remove redundant call to mod_schema()
* Parent tooltips to mw
* Fix a crash when truncating note text
String::truncate() is a bit of a footgun, and I've hit this before
too :-)
* Remove ExportLimit in favour of separate classes
* Remove OpWithBackendProgress and ClosedCollectionOp
Backend progress logic is now in ProgressManager. QueryOp can be used
for running on closed collection.
Also fix aborting of colpkg exports, which slipped through in #1817.
* Tidy up import log
* Avoid QDialog.exec()
* Default to excluding scheuling for deck list deck
* Use IncrementalProgress in whole import_export code
* Compare checksums when importing colpkgs
* Avoid registering changes if hashes are not needed
* ImportProgress::Collection → ImportProgress::File
* Make downgrading apkgs depend on meta version
* Generalise IncrementableProgress
And use it in entire import_export code instead.
* Fix type complexity lint
* Take count_map for IncrementableProgress::get_inner
* Replace import/export env with Shift click
* Accept all args from update() for backend progress
* Pass fields of ProgressUpdate explicitly
* Move update_interval into IncrementableProgress
* Outsource incrementing into Incrementor
* Mutate ProgressUpdate in progress_update callback
* Switch import/export legacy toggle to profile setting
Shift would have been nice, but the existing shortcuts complicate things.
If the user triggers an import with ctrl+shift+i, shift is unlikely to
have been released by the time our code runs, meaning the user accidentally
triggers the new code. We could potentially wait a while before bringing
up the dialog, but then we're forced to guess at how long it will take the
user to release the key.
One alternative would be to use alt instead of shift, but then we need to
trigger our shortcut when that key is pressed as well, and it could
potentially cause a conflict with an add-on that already uses that
combination.
* Show extension in export dialog
* Continue to provide separate options for schema 11+18 colpkg export
* Default to colpkg export when using File>Export
* Improve appearance of combo boxes when switching between apkg/colpkg
+ Deal with long deck names
* Convert newlines to spaces when showing fields from import
Ensures each imported note appears on a separate line
* Don't separate total note count from the other summary lines
This may come down to personal preference, but I feel the other counts
are equally as important, and separating them feels like it makes it
a bit easier to ignore them.
* Fix 'deck not normal' error when importing a filtered deck for the 2nd time
* Fix [Identical] being shown on first import
* Revert "Continue to provide separate options for schema 11+18 colpkg export"
This reverts commit 8f0b2c175f.
Will use a different approach
* Move legacy support into a separate exporter option; add to apkg export
* Adjust 'too new' message to also apply to .apkg import case
* Show a better message when attempting to import new apkg into old code
Previously the user could end seeing a message like:
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb5 in position 1: invalid start byte
Unfortunately we can't retroactively fix this for older clients.
* Hide legacy support option in older exporting screen
* Reflect change from paths to fnames in type & name
* Make imported decks normal at once
Then skip special casing in update_deck(). Also skip updating
description if new one is empty.
Co-authored-by: Damien Elmes <gpg@ankiweb.net>
