* Feat/Add legacy evaluate config bool
* Minor tweaks based on PR suggestions (dae)
New enabling command:
from anki.config import Config
mw.col.set_config_bool(Config.Bool.FSRS_LEGACY_EVALUATE, True)
* Update to FSRS-rs v1.3.2
* add fsrs_short_term_with_steps_enabled to config
* ./ninja fix:minilints
* fix defaults_for_testing
* if current parameters are invalid, skip comparison
fix#3498
* fix redundant_field_names
* cargo clippy --fix
* Update to FSRS-rs v1.3.3
* Update to FSRS-rs v1.3.4
* Avoid an extra config lookup on each card answer (dae)
* start of load balancer
* add configuration options; option to load balance per deck
* formatting
* clippy
* add myself to contributors
* cleanup
* cargo fmt
* copyright header on load_balancer.rs
* remove extra space
* more formatting
* python formatting
* ignore this being None
only doing this cause python has awful lambdas and can't
loop in a meaningful way without doing this
* only calculate notes on each day if we are trying to avoid siblings
* don't fuzz intervals if the load balancer is enabled
* force generator to eval so this actually happens
* load balance instead of fuzzing, rather than in addition to
* use builtin fuzz_bounds rather than reinvent something new
* print some debug info on how its load balancing
* clippy
* more accurately load balance only when we want to fuzz
* incorrectly doublechecking the presence of the load balancer
* more printfs for debugging
* avoid siblings -> disperse siblings
* load balance learning graduating intervals
* load balancer: respect min/max intervals; graduating easy should be at least +1 good
* filter out after-days under minimum interval
* this is an inclusive check
* switch load balancer to caching instead of on the fly calculation
* handle case where load balancer would balance outside of its bounds
* disable lb when unselecting it in preferences
* call load_balancer in StateContext::with_review_fuzz instead of next to
* rebuild load balancer when card queue is rebuilt
* remove now-unused configuration options
* add note option to notetype to enable/disable sibling dispersion
* add options to exclude decks from load balancing
* theres a lint checking that the link actually exists so I guess I'll add the anchor back in later?
* how did I even update this
* move load balancer to cardqueue
* remove per-deck balancing options
* improve determining whether to disperse siblings when load balancing
* don't recalculate notes on days every time
* remove debug code
* remove all configuration; load balancer enabled by default; disperse siblings if bury_reviews is set
* didn't fully remove caring about decks from load balancer sql query
* load balancer should only count cards in the same preset
* fuzz interval if its outside of load balancer's range
* also check minimum when bailing out of load balancer
* cleanup; make tests happy
* experimental weight-based load balance fuzzing
* take into account interval when weighting as it seems to help
* if theres no cards the interval weight is just 1.0
* make load balancer disableable through debug console
* remove debug prints
* typo
* remove debugging print
* explain a bit how load balancer works
* properly balance per preset
* use inclusive range rather than +1
* -1 type cast
* move type hint somewhere less ugly; fix comment typo
* Reuse existing deck list from parent function (dae)
Minor optimisation
* Add AnkiHub section to preferences screen
* Add short intro for AnkiWeb and AnkiHub to syncing section
* Add AnkiHub login screen
* Implement login methods in backend
* Set minimum dialog width
* Add missing colon
* Respect the ANKIHUB_APP_URL env var
This is used by the add-on.
* Simplify login error reporting
* Fix from_prefs_screen not passed to subcall
* Add missing ankihub_pb2 import
* Install AnkiHub add-on after sign-in
* Avoid .exec()
* Update ftl/core/sync.ftl
Co-authored-by: Damien Elmes <dae@users.noreply.github.com>
* Split translation string
* Support login by username/email
* Fix entered username/email not being passed back to on_done
* Remove unused import
* Move to 'Third-party services' section
* Tweak login dialog's heading
* Remove 'third-party' from intro text
* Tweak copy
* Prefix profile keys
* Tweak strings
* Remove description from login dialog
* Remove signup links
* Clear credentials in ankihub_logout()
* Call .adjustSize()
* Title Case
* Add padding to third-party services, and fix tab order from other PR
* Add a preference to toggle LaTeX generation
* Fix test
* Remove LaTeX security restrictions
* Show existing LaTeX images regardless of preference
* Lift config check out of loop (dae)
* Shift option to review settings; display warning when disabled (dae)
* Remove v1/v2 support from deck list
* Remove v1/v2 support from most routines and show error
* Remove scheduler_version from preferences
* Fix formatting
* Remove v1/v2 conditionals from Python code
* Fix legacy importer
* Remove legacy hooks
* Add missing scheduler checks
* Remove V2 logic from deck options screen
* Remove the review_did_undo hook
* Restore ability to open old options with shift (dae)
* Pack FSRS data into card.data
* Update FSRS card data when preset or weights change
+ Show FSRS stats in card stats
* Show a warning when there's a limited review history
* Add some translations; tweak UI
* Fix default requested retention
* Add browser columns, fix calculation of R
* Property searches
eg prop:d>0.1
* Integrate FSRS into reviewer
* Warn about long learning steps
* Hide minimum interval when FSRS is on
* Don't apply interval multiplier to FSRS intervals
* Expose memory state to Python
* Don't set memory state on new cards
* Port Jarret's new tests; add some helpers to make tests more compact
https://github.com/open-spaced-repetition/fsrs-rs/pull/64
* Fix learning cards not being given memory state
* Require update to v3 scheduler
* Don't exclude single learning step when calculating memory state
* Use relearning step when learning steps unavailable
* Update docstring
* fix single_card_revlog_to_items (#2656)
* not need check the review_kind for unique_dates
* add email address to CONTRIBUTORS
* fix last first learn & keep early review
* cargo fmt
* cargo clippy --fix
* Add Jarrett to about screen
* Fix fsrs_memory_state being initialized to default in get_card()
* Set initial memory state on graduate
* Update to latest FSRS
* Fix experiment.log being empty
* Fix broken colpkg imports
Introduced by "Update FSRS card data when preset or weights change"
* Update memory state during (re)learning; use FSRS for graduating intervals
* Reset memory state when cards are manually rescheduled as new
* Add difficulty graph; hide eases when FSRS enabled
* Add retrievability graph
* Derive memory_state from revlog when it's missing and shouldn't be
---------
Co-authored-by: Jarrett Ye <jarrett.ye@outlook.com>
* Refactor media sync handling
- The media USN is now returned in sync/meta, which avoids an extra
round-trip.
- Media syncing is now automatically started by the syncing code at
the end of a normal or full sync, which avoids it competing for bandwidth
and resources, and avoids duplicate invalid login messages when the auth
token is invalid.
- Added a new media_sync_progress() method to both check if media is
syncing, and get access to the latest progress.
- Updated the sync log screen to only show the latest line, like AnkiMobile.
- Show media sync errors in a pop-up, so they don't get missed. Use a non-modal
pop-up to avoid potential conflicts with other modals.
* Remove print statement
* Accept iterables as inputs to backend methods
* Shift add-on check to backend; use new endpoint
The new endpoint will return info on a suitable branch if found,
instead of returning all branches. This simplifies the frontend code,
and means that you can now drop support for certain versions without
it also remotely disabling the add-on for people who are running one of
the excluded versions, like in
https://forums.ankiweb.net/t/prevent-add-ons-from-being-disabled-remote-stealthily-surreptitiously/33427
* Bump version to 23.09
This changes Anki's version numbering system to year.month.patch, as
previously mentioned on https://forums.ankiweb.net/t/use-a-different-versioning-system-semver-perhaps/20046/5
This is shaping up to be a big release, with the introduction of FSRS and
image occlusion, and it seems like a good time to be finally updating the
version scheme as well. AnkiWeb has been updated to understand the new
format, and add-on authors will now specify version compatibility using
the full version number, as can be seen here:
https://ankiweb.net/shared/info/3918629684
* Shift update check to backend, and tidy up update.py
* Use the shared client for sync connections too
* Automatically elide empty inputs and outputs to backend methods
* Refactor service generation
Despite the fact that the majority of our Protobuf service methods require
an open collection, they were not accessible with just a Collection
object. To access the methods (e.g. because we haven't gotten around to
exposing the correct API in Collection yet), you had to wrap the collection
in a Backend object, and pay a mutex-acquisition cost for each call, even
if you have exclusive access to the object.
This commit migrates the majority of service methods to the Collection, so
they can now be used directly, and improves the ergonomics a bit at the
same time.
The approach taken:
- The service generation now happens in rslib instead of anki_proto, which
avoids the need for trait constraints and associated types.
- Service methods are assumed to be collection-based by default. Instead of
implementing the service on Backend, we now implement it on Collection, which
means our methods no longer need to use self.with_col(...).
- We automatically generate methods in Backend which use self.with_col() to
delegate to the Collection method.
- For methods that are only appropriate for the backend, we add a flag in
the .proto file. The codegen uses this flag to write the method into a
BackendFooService instead of FooService, which the backend implements.
- The flag can also allows us to define separate implementations for collection
and backend, so we can e.g. skip the collection mutex in the i18n service
while also providing the service on a collection.
Previously it was Backend's responsibility to store the last progress,
and when calling routines in Collection, one had to construct and pass
in a Fn, which wasn't the most ergonomic. This PR adds the last progress
state to the collection, so that the routines no longer need a separate
progress arg, and makes some other tweaks to improve ergonomics.
ThrottlingProgressHandler has been tweaked so that it now stores the
current state, so that callers don't need to store it separately. When
a long-running routine starts, it calls col.new_progress_handler(),
which automatically initializes the data to defaults, and updates the
shared UI state, so we no longer need to manually update the state at
the start of an operation.
The backend shares the Arc<Mutex<>> with the collection, so it can get
at the current state, and so we can update the state when importing a
backup.
Other tweaks:
- The current Incrementor was awkward to use in the media check, which
uses a single incrementing value across multiple method calls, so I've
added a simpler alternative for such cases. The old incrementor method
has been kept, but implemented directly on ThrottlingProgressHandler.
- The full sync code was passing the progress handler in a complicated
way that may once have been required, but no longer is.
- On the Qt side, timers are now stopped before deletion, or they keep
running for a few seconds.
- I left the ChangeTracker using a closure, as it's used for both importing
and syncing.
* Fix .no-reduce-motion missing from graphs spinner, and not being honored
* Begin migration from protobuf.js -> protobuf-es
Motivation:
- Protobuf-es has a nicer API: messages are represented as classes, and
fields which should exist are not marked as nullable.
- As it uses modules, only the proto messages we actually use get included
in our bundle output. Protobuf.js put everything in a namespace, which
prevented tree-shaking, and made it awkward to access inner messages.
- ./run after touching a proto file drops from about 8s to 6s on my machine. The tradeoff
is slower decoding/encoding (#2043), but that was mainly a concern for the
graphs page, and was unblocked by
37151213cd
Approach/notes:
- We generate the new protobuf-es interface in addition to existing
protobuf.js interface, so we can migrate a module at a time, starting
with the graphs module.
- rslib:proto now generates RPC methods for TS in addition to the Python
interface. The input-arg-unrolling behaviour of the Python generation is
not required here, as we declare the input arg as a PlainMessage<T>, which
marks it as requiring all fields to be provided.
- i64 is represented as bigint in protobuf-es. We were using a patch to
protobuf.js to get it to output Javascript numbers instead of long.js
types, but now that our supported browser versions support bigint, it's
probably worth biting the bullet and migrating to bigint use. Our IDs
fit comfortably within MAX_SAFE_INTEGER, but that may not hold for future
fields we add.
- Oneofs are handled differently in protobuf-es, and are going to need
some refactoring.
Other notable changes:
- Added a --mkdir arg to our build runner, so we can create a dir easily
during the build on Windows.
- Simplified the preference handling code, by wrapping the preferences
in an outer store, instead of a separate store for each individual
preference. This means a change to one preference will trigger a redraw
of all components that depend on the preference store, but the redrawing
is cheap after moving the data processing to Rust, and it makes the code
easier to follow.
- Drop async(Reactive).ts in favour of more explicit handling with await
blocks/updating.
- Renamed add_inputs_to_group() -> add_dependency(), and fixed it not adding
dependencies to parent groups. Renamed add() -> add_action() for clarity.
* Remove a couple of unused proto imports
* Migrate card info
* Migrate congrats, image occlusion, and tag editor
+ Fix imports for multi-word proto files.
* Migrate change-notetype
* Migrate deck options
* Bump target to es2020; simplify ts lib list
Have used caniuse.com to confirm Chromium 77, iOS 14.5 and the Chrome
on Android support the full es2017-es2020 features.
* Migrate import-csv
* Migrate i18n and fix missing output types in .js
* Migrate custom scheduling, and remove protobuf.js
To mostly maintain our old API contract, we make use of protobuf-es's
ability to convert to JSON, which follows the same format as protobuf.js
did. It doesn't cover all case: users who were previously changing the
variant of a type will need to update their code, as assigning to a new
variant no longer automatically removes the old one, which will cause an
error when we try to convert back from JSON. But I suspect the large majority
of users are adjusting the current variant rather than creating a new one,
and this saves us having to write proxy wrappers, so it seems like a
reasonable compromise.
One other change I made at the same time was to rename value->kind for
the oneofs in our custom study protos, as 'value' was easily confused
with the 'case/value' output that protobuf-es has.
With protobuf.js codegen removed, touching a proto file and invoking
./run drops from about 8s to 6s.
This closes#2043.
* Allow tree-shaking on protobuf types
* Display backend error messages in our ts alert()
* Make sourcemap generation opt-in for ts-run
Considerably slows down build, and not used most of the time.
Due to the orphan rule, this meant removing our usages of impl ProtoStruct,
or converting them to a trait when they were used commonly.
rslib now directly references anki_proto and anki_i18n, instead of
'pub use'-ing them, and we can put the generated files back in OUT_DIR.
A couple of motivations for this:
- genbackend.py was somewhat messy, and difficult to change with the
lack of types. The mobile clients used it as a base for their generation,
so improving it will make life easier for them too, once they're ported.
- It will make it easier to write a .ts generator in the future
- We currently implement a bunch of helper methods on protobuf types
which don't allow us to compile the protobuf types until we compile
the Anki crate. If we change this in the future, we will be able to
do more of the compilation up-front.
We no longer need to record the services in the proto file, as we can
extract the service order from the compiled protos. Support for map types
has also been added.
* Default to current deck in csv import if settings allow it
Reuses defaults_for_adding(). In the future we might also want to update
the last deck/notetype on successful completion, if entries weren't
specified in the file.
https://forums.ankiweb.net/t/importing-new-notes-to-wrong-deck-in-anki-2-1-63/30598
* Address review feedback from Rumo
* Fix sync client ignoring directories
Current implementation of the sync client does not properly send requests to a
self-hosted sync server if the URL has directories.
If the self-hosted sync URL is `https://example.org/foo/bar/`, Anki is expected
to send requests to `https://example.org/foo/bar/sync/hostKey`. Instead, it will
discard the directories and wrongly send requests to
`https://example.org/sync/hostKey`.
Fixes: e5d5d1d ("Fix panic with invalid sync server URL with port")
* Add XeR to contributors
* Allow user to select I/O notetype instead of enforcing a specific name
* Display a clearer error when I/O note is missing an image
Opening the card layout screen from "manage notetypes" was showing an
error about the Anki version being too old.
Replacement error is not currently translatable.
* Preserve existing notetype when adding I/O notetype
* Add a 'from clipboard' string
The intention is to use this in the future to allow an image occlusion
to be created from an image on the clipboard.
* Tweak I/O init
- Use union type instead of multiple nullable values
- Pass the notetype id in to initialization
* Fix image insertion in I/O note
- The regex expected double quotes, and we were using single ones
- Image tags don't need to be closed
* Use more consistent naming in image_occlusion.proto
* Tweaks to default I/O notetype
- Show the header on the front side as well (I presume this is what
users expect; if not am happy to revert)
- Don't show comments on card (again, I presume users expect to use
this field to add notes that aren't displayed during review, as they
can use back extra for that)
* Fix sticky footer missing background
Caused by earlier CSS refactoring
* Store the original stock notetype kind in the notetype
Will allow us to provide a command to restore a notetype to its default
settings/templates.
* Add a new action to restore a notetype to its original state
* add note types with occlusions and image fields
* generate image occlusion cloze div data
- generate div element with data-* atrributes for canvas shape generate for reviewer
* getting image data & deck id and adding notes
the implementation added into backend
- added service index in backend.proto for image occlusion request
- created image_occlusion.proto with required message and service
- implementation in backend for getting image and adding notes, also during editing return imagecloze note and update notes
- add notes to selected deck, if no notetype then add image occlusion notetypes
- reuse notetype from stock notetypes when not exist
* script for generating shapes using canvas api in reviewer
- the flash issues fixed by loading image and using image size to draw canvas, also when image get resized, calculate scale using natural width and canvas width to draw shape at right position
- limit size of canvas for safari
* init image occlusion page in ts and build page
with
- fabricjs for editing shapes
- panzoom for drag and zoom
- pickr for color picker
- build page using web.rs
* implement top toolbar for canvas shapes
- undo & redo tools
- zoom in, zoom out and zoom fit
- group & ungroup
- copy & paste
- set transparency of shapes
- align tools
* implement side toolbar for drawing shapes
add top toolbar and the side toolbar contains following tools
- cursor for selecting shapes
- zoom for drag and zoom shapes in mask editor
- rectangle for creating it
- ellipse for creating it
- polygon for creating it using points
- shape fill color
- question mask color (currently only single color can be added for all shapes)
* add maskeditor page for editing mask
- add side toolbar and sidebar include toptoolbar
- load maskeditor in two mode
- for adding note using path to image
- for editing note using note id
* implement note editor page for adding notes
- the note editor page have simple button (B/I/U) and option to toggle html view
- option to select deck for adding notes into that deck
- option to generate to hide all, guess one & hide one, guess one notes
* add image occlusion page
add side toolbar, top toolbar, mask editor and note editor
- option to switch between mask editor and note editor
* implement generates notes and save notes
implemention to show toast components for messages
* removed pickr & implemented color picker component
- remove pickr
- implemented using html5 canvas
- range input for changing color
- another range input for opacity changes
- hex and rgba value support
* rename methods name & rust unwrap safety
- change plural names to singular
- create respone message in proto and return response with imagecloze note or error if not found with note id
- remove image_occlusion from post handler list
- rename service name in mediasrv.py
- rename methods name for image occlusion in backend and image_occlusion
- update frontend also for update functions' names
- handle error in frontend mask-editor.ts, when error getting notes then toast message shown to frontend
* extract to function & add comments & remove global
- extract function in mask-editor.ts to reduce duplicate
- remove unused global from css
- add comments to store.ts explaining usage
- changes id to noteId in lib.ts
- add comments for limitSize, becuase of duplicate implementation
* remove image_occlusion notetype
- remove from stock notetype, stdmodels
- add implementation for notetype to image occlusion
- add i18n for errors
* update smooth scroll, always show cursor tools
- change questionmask to qmask
- make selectable for shape true in all tools to simplify edits and draw shapes
- update image occlusion in reviewer ts to load image properly
* add and get notetype else return errors
* fix: not showing occlusion
* Use a oneof for ImageClozeNoteResponse
Makes it clearer that only one of them can be returned
* Don't crash if image filename not provided
The second unwrap should be ok, as the input is utf8
* Refactor get_image_cloze_note
- fixes crash when note doesn't exist - Ok(None) case was not covered
- decouples business logic from native error->proto error conversion
- no need for original copy
- field[x] is more idiomatic than field.get(x).unwrap()
- don't need mutable access to fields
* Fix crash if image file unreadable
+ Use our read_file helper for better error context
* Add metadata() helper
* Fix crash if file metadata can't be read
* remove color picker, qmask and shape color
- remove strings from ftl
- remove color picker component
- remove from cloze generation
- remove icons for two buttons
- use constant color for shapes
* update color in reviewer and ftl strings
* fix shape position in canvas & add border to shape
- rename mask to inactive shape and active shape color
- border witdth and border color
- change decimal point deserializing string and toFixed(2)
- add thin border in mask editor, may be image background was transparent
* fix shape position in canvas after modified
- do not draw fixed ratio shapes by turn of uniformScaling
- fix rectangle width,height
- fix ellipse rx,ry,width,height
- fix polygon postion and points
- draw outside of canvas also
* fix border width and color in reviewer canvas
- rename variable
* refactor cloze div generate and remove angle
* fix origin when drawn outside of canvas from right
* fix shape at boundry & not include rx,ry rectangle
- move shapes at boundry when pointer is outside of canvas
- include rx, ry for ellipse only
- include points for polygon only
* fix lint errors & update image size in editor canvas based on height and width
* remove unsupported layerX & layerX for touchscreen
- fix shapes at edges
* implemented undo redo with canvas state
- implemented undo redo using fabric canvas events
- polygon is special case and implemented only added and modified event
- rectangle and ellipse have object:added, object:modified and object:removed case
- change id to undo and redo
* remove background image from canvas and used css to put image tag below canvas editor
- set image width and height after adding image
* fix for polygon points, add br in cloze strings, & toogle masks button
- fix shapes at edges
- toggle masks button to show/hide masks
- hide clozes string, it contains <br>
- set height for div container (used 'relative' in css)
* refactor top toolbar, add space and border radius
- rename cursor tools
- add left and right border
* fix undo after undo happen, use transparent color in draw mode
* Move open_test_collection into Collection test impl
* Fix invalid ids when checking database
* Report fixed invalid ids
* Improve message when trying to export invalid ids
Also move ImportError due to namespace conflicts with snafu macro.
* Take a human name in DeckAdder::new
* Mention timestamps in the db check message (dae)
Will help to correlate the fix with the message shown when importing/
exporting.
* Ensure state mutator runs after card is rendered
* Ensure ease buttons only show when states are ready
* Pass context into states mutator
* Revert queuing of state mutator hook
Now that context data is exposed users shouldn't rely on the question
having been rendered anymore.
* Use callbacks instead of signals and timeout
... to track whether the states mutator ran or failed.
* Make mutator async
* Remove State enum
* Reduce requests and compute seed on backend
* Add CardAdder test helper
* Add option to have new cards ignore the review limit
Also entails a lot of refactoring because the old code was deeply
coupled to the previous behaviour.
* Add global option to ignore review limit
* Refactor decrementation
* Unify testing
* Implement TTS using windows crate
* Use API calls instead of SSML
* Properly stop player in case of TTS error
* Add context to WindowsErrors
* Validate available voices
* Remove TTS text from synthesize error
* Limit maximum buffer size
* Make validation optional and list it in tts filter
* We no longer need the winrt module (dae)
* Use a separate request object so the meaning of the bool is clear (dae)
* Slightly shorten runtime error message (dae)
The default message appears to clip slightly.
* Alternate buffer implementation (dae)
* Use array instead of vec
* Drop the max buffer size to 128k (dae)
This PR replaces the existing Python-driven sync server with a new one in Rust.
The new server supports both collection and media syncing, and is compatible
with both the new protocol mentioned below, and older clients. A setting has
been added to the preferences screen to point Anki to a local server, and a
similar setting is likely to come to AnkiMobile soon.
Documentation is available here: <https://docs.ankiweb.net/sync-server.html>
In addition to the new server and refactoring, this PR also makes changes to the
sync protocol. The existing sync protocol places payloads and metadata inside a
multipart POST body, which causes a few headaches:
- Legacy clients build the request in a non-deterministic order, meaning the
entire request needs to be scanned to extract the metadata.
- Reqwest's multipart API directly writes the multipart body, without exposing
the resulting stream to us, making it harder to track the progress of the
transfer. We've been relying on a patched version of reqwest for timeouts,
which is a pain to keep up to date.
To address these issues, the metadata is now sent in a HTTP header, with the
data payload sent directly in the body. Instead of the slower gzip, we now
use zstd. The old timeout handling code has been replaced with a new implementation
that wraps the request and response body streams to track progress, allowing us
to drop the git dependencies for reqwest, hyper-timeout and tokio-io-timeout.
The main other change to the protocol is that one-way syncs no longer need to
downgrade the collection to schema 11 prior to sending.
* Relax chrono specification for AnkiDroid
https://github.com/ankidroid/Anki-Android-Backend/pull/251
* Add AnkiDroid service and AnkiDroid customizations
Most of the work here was done by David in the Backend repo; integrating
it into this repo for ease of future maintenance.
Based on 5d9f262f4c
with some tweaks:
- Protobuf imports have been fixed to match the recent refactor
- FatalError has been renamed to AnkidroidPanicError
- Tweaks to the desktop code to deal with the extra arg to open_collection,
and exclude AnkiDroid service methods from our Python code.
* Refactor AnkiDroid's DB code to avoid uses of unsafe
The Rust community appear to have converged on tracing - it's used by
the Rust compiler, and receives close to 10x the number of downloads
that slog does. Its API is more ergonomic, and it does a much nicer
job with async rust.
To make this change, we no longer pass around explicit loggers, and rely
on a globally-registered one. The log file location has been changed
from one in each profile folder to a single one in the base folder. This
will remain empty for most users, since only errors are logged by default,
but may be useful for debugging future changes.
* Run cargo +nightly fmt
* Latest prost-build includes clippy workaround
* Tweak Rust protobuf imports
- Avoid use of stringify!(), as JetBrains editors get confused by it
- Stop merging all protobuf symbols into a single namespace
* Remove some unnecessary qualifications
Found via IntelliJ lint
* Migrate some asserts to assert_eq/ne
* Remove mention of node_modules exclusion
This no longer seems to be necessary after migrating away from Bazel,
and excluding it means TS/Svelte files can't be edited properly.
