this bypasses rebuilding the queue and other startup initialization and thus
loads the deck considerably faster. This is useful when you want to perform
operations on the deck like syncing, but don't need the ability to review
cards
- obsolete spaceUntil - it serves no useful purpose
- the old per-model spacing variables are obsolete, as the new approach
requires uniform spacing across all models for new cards
- introduce a new per-deck variable: newSpacing
- don't fill new queue if we've done today's cards
- still need to check cramming / review early
newSpacing is a time in seconds to delay introduction of sibling new cards.
It can be applied as many times as necessary as there is no harm in new cards
being delayed repeatedly. Because the default queue length is 200 and it can
take quite some time for the spaced cards to be placed in the queue again, we
use a separate array to track spaced new cards provided the configured delay
is less than 20 minutes. At times under 20 minutes this number is not a
guaranteed minimum spacing - if the new card queue is empty the spaced cards
will be flushed before checking the new queue again, as otherwise we end up
trying to fill on every repetition. The due counts no longer decrease by more
than one if the spacing is less than the due cutoff, since that confused some
users.
Review cards are now placed at the end of the current review queue, and will
never be rescheduled to a different day. The old approach had a number of
problems:
- the more card models you had, the more likely a card would be spaced
multiple times, resulting in you forgetting the card before you get a chance
to review it
- spacing was applied even if the due card was already late
- repeatedly failing one card over a period of days or weeks would also stave
the other cards of attention
- the local deck name must now match the online deck
- syncName is a hash of the current deck's path or None
- the hash is checked on deck load, and if it is different (because the deck
was copied or moved), syncing is disabled. This should prevent people from
accidentally clobbering their online decks
When you call operations like deleteCards(), suspendCards() and so on, it is
now necessary to call deck.reset() afterwards. This allows the calling code to
delay a reset if necessary. If the calling code calls a function that says the
caller must reset, the caller should be sure to call .reset() and fetch the
current card again. Failure to do the latter will result in answerCard()
attempting to remove the card from the queue, when the queue has been cleared.
- make sure cardLimit() matches on sql statements that are broken over lines
- fix logic in getCardId()
- don't increment failed count if delay1>0 and card was mature
The old delay1 behaviour isn't easy to achieve with the queue code, as we only
refresh the queue when it's emptied, and if the user has delay1 set to say 9
hours, failed mature cards sitting in the queue could prevent subsequent young
failures from being displayed. Instead we convert delay1 to a count in days in
which to offset failed mature cards. 0 means the same time as delay0, 1 means
show the card a day later, and so on. This means users will lose the ability
to delay mature cards for x number of minutes more than young cards, but a
scan of AnkiOnline decks indicates that's not often done.
We also need to use a separate cutoff for failed cards, since we need to be
able to display them as they expire if the user has disabled per-day
scheduling.
And instead of marking cards as due in the future, we set their due time to
the current time, and move the delay0 calculation to getCardId(). This means
that if the user changes their failed card settings from say 1 hour to 10
minutes, the changes apply to the currently failed cards and not just cards
failed in the future.
In various parts of the code we need to get all cards of a given category
(new, failed, etc) regardless of whether they're suspended, buried, etc. So we
store the true type in the obsolete relativeDelay column and add in index for
it, because it's cheaper than putting indices on reps & successive.
- because the cutoff adds a few hours past midnight, it's possible for a card
that's scheduled for 1.0 days ahead to fall within the current cutoff, so we
need to make sure that doesn't happen
- set spaceUntil=0 when answering card again
- fix randomizeNewCards() query. the whole codebase needs auditing for type
references which need updating
* Adjust type to remove cards from the queues, so we don't have to rebuild
priorities to restore them:
Type -= 3 when suspending
Type += 3 when burying
Type += 6 when cramming / reviewing early
We still need to adjust priorities for backwards compatibility, but this can
be removed in the future.
* Factor out scheduler-specific code in answerCard(), so the different
schedulers are now fully modular
* Differentiate between a card's current queue and its type
* Make sure dueCutoff cuts off at the chosen offset instead of midnight
- new type, combinedDue for failed cards & count checks
- only reset() on deck load if not already done
- remove isDue from dynamic indices but leave old ones around for now
- cramming is now a separate scheduler type
- correctly answering a card while cramming causes its scheduling to be
changed in the standard review too
- options to sort cards by earliest modified, ordered, random
- render priority 0 obsolete, as it's all done at queue generation time now
