Confirmed correct layout in RTL mode.
I experimented with adding a tooltip as well, as suggested in
https://forums.ankiweb.net/t/anki-23-12-beta/37771/82, but it's
confusing as we already change the mouse cursor/underline when the user
hovers over a label. Given the help text universally starts with
"affects the entire collection", I think that's good enough.
The previous wording could be interpreted as 'time until showing question'
or 'time that question should be shown'. I'd intended the latter, and
I didn't notice that the original implementation was doing the former.
* Fix RTL position of close button in help modals
* Fix position of active button's border
* Fix margin of modal's title
* Fix alignment of modal buttons' text
* Add missing translation
- Hide traceback
- Include full add-on info in 'copy debug info' button, like about
screen
- Link to troubleshooting page
- Use non-modal pop-up in the common case, to avoid potential conflicts
with other modals.
Closes#2830
* remove unfinished polygon and remove selectable for shapes in polygon mode
* make group and polygon position remain inside canvas area
* click through transparent area in grouped object
* add some shortcuts for basic usages
* tools button icon in center & switch mode border
* fix load svg image
* basic rtl support, panzoom have issues in rtl mode
* better zoom option both in ltr and rtl
* handle zoom event in mask editor
* add h button to handle toggle mask
* add more mime type
* use capital M (shift+m) for toggle mask
* allow io shortcuts in mask editor only
* make other shapes also remain in canvas bound area
* better zoom implementation, zoom from center
add zoom to resize event listener
* add a border to corner to handle blend of control
* add refresh button to go to selection menu
* add tooltip to shortcuts and also add shortcut for other tools
* make opacity remain in same state when toggled on
* opacity for group/ungroup objects
* update shortcuts implementation
* Allow im-/exporting with or without deck configs
Closes#2777.
* Enable webengine remote debugging in launch.json
* Reset deck limits and counts based on scheduling
Also:
- Fix `deck.common` not being reset.
- Apply all logic only depending on the source collection in the
gathering stage.
- Skip checking for scheduling and only act based on whether the call
wants scheduling. Preservation of filtered decks also depends on all
original decks being included.
- Fix check_ids() not covering revlog.
* Fix importing legacy filtered decks w/o scheduling
* Disable 'include deck options' by default, and fix tab order (dae)
* deck options > deck presets (dae)
* Move stop-timer-on-answer strings to correct section
* Add auto-advance options to deck preset
* Implement answer actions
* Fix error when last card is answered before timeout
* Fix deserialization of answerAction
* Add answerAction to reserved key list
* Fix inverted boolean
* Add option to wait for audio to finish
* Add auto-advance toggle
* Add shortcut
* Disable auto-advance when main window state changes
* Start auto-advance timer after option is toggled
* Disable auto-advance when main window loses focus
* Use existing translations
* Add Answer Hard and Show Reminder
* Add new button to UI
* Add bool to allow creating empty filtered in back end
* Implement logic into front end for passing on bool
* Hide option on old decks
* Show option again if any settings are changed
* Revert "Show option again if any settings are changed"
This reverts commit 094acd9c65936823fa206594da5c1f3e4eb09248.
* Revert "Hide option on old decks"
This reverts commit d20a9a240b4fd85d080e8cc52d94318416ca753f.
* Update string
* Update ftl/core/decks.ftl
---------
Co-authored-by: Damien Elmes <dae@users.noreply.github.com>
- Add a Check for Updates button to the screen
- Make the update list screen non-modal, so that other modal pop-ups
at startup don't leave the user stuck
- When manually checking for updates, update Anki's last check time
* Remove v1/v2 support from deck list
* Remove v1/v2 support from most routines and show error
* Remove scheduler_version from preferences
* Fix formatting
* Remove v1/v2 conditionals from Python code
* Fix legacy importer
* Remove legacy hooks
* Add missing scheduler checks
* Remove V2 logic from deck options screen
* Remove the review_did_undo hook
* Restore ability to open old options with shift (dae)
* Draft set optimal/calculated retention button
Temporarily save the calculated optimal retention and display it with a button
that sets the desired retention above to this value.Don't show button until
attention had been calculated. Disable button when optimal and desired
attention are equal.
I find this nicer than the current alert-popup solution, as it avoids a popup
and gives a choice to the user to accept the calculated retention or not, while
also persisting the calculated retention on the screen for a bit.
TODO: What's still missing is that the `optimalRetention` variable is global and
persists when I change presets. When changing presets the variable should reset to
`undefined`, which would also makes the button disappear. Ideally it should also
disappear when changing the FSRS parameters. So probably it should be made part
of some deck options state and subscribe to some events. But with that I might
need some help. Also I thought whether that variable should go into the deck
options schema but tbh it's not something we want to persist between sessions,
users should recalculate it.
* Add me to contributors for tests so pass
* Add formatting ant type fixes to make tests pass
* Minor fixes (dae)
* Remove the period
+ Don't protect the comments field
It's not required by our current code. We can remove the protection
from Header and Back Extra in the future too, once we no longer depend
on them.
Closes#2621
* Pack FSRS data into card.data
* Update FSRS card data when preset or weights change
+ Show FSRS stats in card stats
* Show a warning when there's a limited review history
* Add some translations; tweak UI
* Fix default requested retention
* Add browser columns, fix calculation of R
* Property searches
eg prop:d>0.1
* Integrate FSRS into reviewer
* Warn about long learning steps
* Hide minimum interval when FSRS is on
* Don't apply interval multiplier to FSRS intervals
* Expose memory state to Python
* Don't set memory state on new cards
* Port Jarret's new tests; add some helpers to make tests more compact
https://github.com/open-spaced-repetition/fsrs-rs/pull/64
* Fix learning cards not being given memory state
* Require update to v3 scheduler
* Don't exclude single learning step when calculating memory state
* Use relearning step when learning steps unavailable
* Update docstring
* fix single_card_revlog_to_items (#2656)
* not need check the review_kind for unique_dates
* add email address to CONTRIBUTORS
* fix last first learn & keep early review
* cargo fmt
* cargo clippy --fix
* Add Jarrett to about screen
* Fix fsrs_memory_state being initialized to default in get_card()
* Set initial memory state on graduate
* Update to latest FSRS
* Fix experiment.log being empty
* Fix broken colpkg imports
Introduced by "Update FSRS card data when preset or weights change"
* Update memory state during (re)learning; use FSRS for graduating intervals
* Reset memory state when cards are manually rescheduled as new
* Add difficulty graph; hide eases when FSRS enabled
* Add retrievability graph
* Derive memory_state from revlog when it's missing and shouldn't be
---------
Co-authored-by: Jarrett Ye <jarrett.ye@outlook.com>
* Make enum selector generic
* Refactor ImportCsvPage to support tooltips
* Improve csv import defaults
* Unify import pages
* Improve import page styling
* Fix life cycle issue with import properties
* Remove size constraints to fix scrollbar styling
* Add help strings and urls to csv import page
* Show ErrorPage on ImportPage error
* Fix escaping of import path
* Unify ImportPage and ImportLogPage
* Apply suggestions from code review (dae)
* Fix import progress
* Fix preview overflowing container
* Don't include <br> in FileIoErrors (dae)
e.g. 500: Failed to read '/home/dae/foo2.csv':<br>stream did not contain valid UTF-8
I thought about using {@html ...} here, but that's a potential security issue,
as the filename is not something we control.
